Looking for a way to join two V-Slot or 20 Series T-slot aluminum extrusions together at a 90-degree angle? Our standard 20mm x 20mm x 17mm T-slot tab is just what you need!
Looking for a reliable and powerful blower fan? Check out our 12V DC Blower Turbine 50mm fan! It's perfect for cooling electronics, hotends, 3D prints and laser modules.
Don't let loose nuts slow down your projects! Our Chrome Steel Lock Nuts provide strength, with a Nylon insert to prevent them from loosening over time or with vibration. For your convenience, these are sold individually. So, add as many as you need to your cart now.
The Belt and Pinion system provides smooth, accurate, and quick operation along V-Slot Linear Rail - perfect for your industrial projects and hobby projects, and more. The kit is an easy way to get all the pieces needed for the build, and you can customize it with different options of V-Slot Extrusions and Gantry Plate. Follow the instructions below to put it together step by step. This model 2 has two gantry plates when compared to model 1, and this offers more rigidity.
Our Hold Down Clamps can be used with our T-slot track. It is widely used in woodworking router table, sliding shelves, feather board, miter gauge, fence and other industrial and non-industrial field. This T-Track is a great addition to any work bench. It can even be added to CNC router work surface to assist in holding down material.
Looking to fine-tune your V Wheels? Our Eccentric Spacers of 6/6.35mm height are perfect for adjusting your V Wheels onto V-Slot. With an approx 0.79mm adjustment range, you can be sure of a very strong and secure connection between the V rail and the wheel. 10mm flange allows for a sturdy base for a stable wheel mount.
This high-quality aluminum flexible jaw coupling is perfect for connecting your NEMA24 stepper motor (DC motor shaft 8mm) to your lead screw. The flexibility will help with any misalignment while the jaw allows for higher torque than our Flexible Couplings. So why wait? Get yours today!
The Belt Mount Plate L Type is an easy way to attach the ends of an open-ended belt to a V-Slot or another t-slot extrusion. To tension the belt, attach one end then tension the belt as a second clip is attached. Using the perpendicular hole, an M5 screw and nut can be used as a tensioner. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
Eccentric Spacers 6.35mm (1/4″) - If you're looking for a way to tighten up your V Wheels on V-Slot, eccentric spacers are the perfect solution. These little guys are essential when you want to avoid any slack in the movement of the gantry cart. So don't wait, pick up some eccentric spacers today!
The Idler Pulley Plate gives you a way to mount your Smooth Idler Pulley while still being able to move it around. This is helpful because it makes it easy to tension your belt.
Enclosures guard your workshop and machine against harm due to elements like dust, temperature, and UV light, and reduce noise from the machine. Enclosure dimensions 1.5x1x1 meter length, width and height respectively. If you need help with the design or have any questions, please let us know. We're always happy to help!
The C-Beam Actuator Kit is an actuator driven by an ACME lead screw. It includes everything you need for the build, and is available in 250mm, 500mm, 1000mm, and 1500mm sizes.
Looking for an easy way to attach your Cable Drag Chains to your build? Look no further than our Cable Drag Chain Mounting Brackets. With multiple holes and slots, they're designed to accommodate a wide variety and size of Cable Drag Chain ends.
Enclosures guard your workshop and machine against harm due to elements like dust, temperature, and UV light, and reduce noise from the machine.Enclosure dimensions 1x1x1 meter length, width and height respectively. If you need help with the design or have any questions, please let us know. We're always happy to help!
No matter the project, these Allen Key / Wrench Tools will come in handy. They're available in sizes from 2mm – 5mm and fit all of our screws. So why wait? Add them to your cart today.
The Belt Mount Plate is an easy way to attach an open-ended belt to a V-Slot or other t-slot extrusion. Just wrap the belt through the slots and over itself like you would a typical backpack strap. To tension the belt, attach one end first, then tension the belt as you attach the second clip. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
Keep your work area tidy with our Cable Saddles. Attach them to V-Slot or Plates with the included M5 8mm Low Profile Screw and Drop-in Tee Nut. Check out the photos for some mounting ideas.
OpenRail is a versatile linear rail system that can be used with any V-Slot linear rail. It's perfect for use with our selection of OpenRail Gantry Plates and Delrin Dual V Wheels.