The Xtreme line is our strongest and most durable line of parts. The Solid V Xtreme Wheel is designed for strength and reliability. Note that it is a wheel only, not a wheel kit.
Looking to fine-tune your V Wheels? Our Eccentric Spacers of 6/6.35mm height are perfect for adjusting your V Wheels onto V-Slot. With an approx 0.79mm adjustment range, you can be sure of a very strong and secure connection between the V rail and the wheel.
The Belt Mount Plate L Type is an easy way to attach the ends of an open-ended belt to a V-Slot or another t-slot extrusion. To tension the belt, attach one end then tension the belt as a second clip is attached. Using the perpendicular hole, an M5 screw and nut can be used as a tensioner. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
The Xtreme Mini Wheel is a strong and durable part of our Xtreme line, designed for precision and strength. Note that it is a wheel only, not a wheel kit. These Xtreme Mini V’s are made from hard polycarbonate material, which is strong and resistant to wear. This leads to better precision and strength for your builds.
Looking for a reliable and sturdy shaft collar? Our set screw-type shaft collar is perfect for ACME threaded rods or smooth shafts. Available size is 8mm ID and 14mm OD.
These rubber end stops are perfect for use with linear rails. By placing them on the end of the rail, you can prevent the carriage from running too far. They work well with limit switches as an additional measure of protection.
The Internal Gear Rack is designed to fit inside the channel of our V-Slot Linear Rail. It works with all our different V-Slot profiles and can be secured in place using a T-Nut and Bolt on each end. The ends of the gear rack are specially designed so that racks can be joined to make long runs.
Every build needs a big, red STOP switch that's easy to see and hit in an emergency. When you push it, it will latch in the down position. To release it, you have to rotate it. This helps prevent accidental re-activation.
The Low Profile Screws are the perfect choice for your next project! Their ultra-low profile design provides plenty of clearance, making them ideal for use in tight spaces. The low profile head will not get in the way, ensuring a smooth build process. Lots of sizes to choose from for your projects. Sold in Packs of 10
Check out our awesome, high-quality, custom-made aluminum spacers! They make great, sturdy standoffs/spacings for your projects. This Metric version of the spacer is 10mm OD and 5mm ID, so you know it'll be a stable platform. The spacer has M5 ID to give a thicker wall to keep the screw snug and centered.
T-Nuts are essential for creating a sturdy and reliable connection with V-Slot and most aluminum T-Slot extrusion. Our T-Nuts have angled corners that make it easier to slide into slots, so you can create a stronger connection without all the hassle.
The Double Tee Nut is perfect for connecting V-Slot and most T-Slot Extrusions end to end, or for any 20mm spaced connection point. It's easy to use and reliable, so you can rest assured your connections will be secure.
Don't let loose nuts slow down your projects! Our Chrome Steel Lock Nuts provide strength, with a Nylon insert to prevent them from loosening over time or with vibration. For your convenience, these are sold individually. So, add as many as you need to your cart now.
The shim is an important part of the Mini V Wheel Kit. By placing it between the two bearings, you can avoid binding and keep your wheels working properly. Plus, they're affordable enough to use as a washer on any of your projects! 8mm OD x 5mm Bore x 1mm thickness.
End caps give your V-Slot project a polished look. They also keep debris and dust from getting inside the rails. Made from black anodized aluminum, our end caps are durable and easy to install.
The C-Beam Gantry Plate has been designed for use with the C-Beam shaped linear rail. This allows for smoother movement and easier use of the Mini V-Wheels.
Cable Ties – Pack 10 – 2 x 100mm; Looking for an easy way to keep your cords and cables organized? Check out our selection of cable ties. With 10 ties in each pack, you'll have plenty to keep your space neat and tidy.
Looking for a durable and reliable timing belt? Look no further than our GT2 Closed Loop Timing Belts. Available in 200 and 210mm sizes, our belts are perfect for a variety of applications. Order yours today!
The C-Beam Actuator Kit is an actuator driven by an ACME lead screw. It includes everything you need for the build, and is available in 250mm, 500mm, 1000mm, and 1500mm sizes.
Looking for an easy way to attach your Cable Drag Chains to your build? Look no further than our Cable Drag Chain Mounting Brackets. With multiple holes and slots, they're designed to accommodate a wide variety and size of Cable Drag Chain ends.
Enclosures guard your workshop and machine against harm due to elements like dust, temperature, and UV light, and reduce noise from the machine.Enclosure dimensions 1x1x1 meter length, width and height respectively. If you need help with the design or have any questions, please let us know. We're always happy to help!
No matter the project, these Allen Key / Wrench Tools will come in handy. They're available in sizes from 2mm – 5mm and fit all of our screws. So why wait? Add them to your cart today.
The Belt Mount Plate is an easy way to attach an open-ended belt to a V-Slot or other t-slot extrusion. Just wrap the belt through the slots and over itself like you would a typical backpack strap. To tension the belt, attach one end first, then tension the belt as you attach the second clip. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
Keep your work area tidy with our Cable Saddles. Attach them to V-Slot or Plates with the included M5 8mm Low Profile Screw and Drop-in Tee Nut. Check out the photos for some mounting ideas.
OpenRail is a versatile linear rail system that can be used with any V-Slot linear rail. It's perfect for use with our selection of OpenRail Gantry Plates and Delrin Dual V Wheels.