The Xtreme line is our strongest and most durable line of parts. The Solid V Xtreme Wheel is designed for strength and reliability. Note that it is a wheel only, not a wheel kit.
The Low Profile Screws are the perfect choice for your next project! Their ultra-low profile design provides plenty of clearance, making them ideal for use in tight spaces. The low profile head will not get in the way, ensuring a smooth build process. Lots of sizes to choose from for your projects. Sold in Packs of 10
The Xtreme Mini Wheel is a strong and durable part of our Xtreme line, designed for precision and strength. Note that it is a wheel only, not a wheel kit. These Xtreme Mini V’s are made from hard polycarbonate material, which is strong and resistant to wear. This leads to better precision and strength for your builds.
These V-Slot Modular Actuator End Mounts create belt-driven linear actuators when used with V-Slot Aluminium Extrusion. By mounting both a Nema 17 Stepper Motor and a Smooth Idler Pulley, you can create a linear actuator for your specific project needs.
T-Nuts are essential for creating a sturdy and reliable connection with V-Slot and most aluminum T-Slot extrusion. Our T-Nuts have angled corners that make it easier to slide into slots, so you can create a stronger connection without all the hassle.
Don't let loose nuts slow down your projects! Our Chrome Steel Lock Nuts provide strength, with a Nylon insert to prevent them from loosening over time or with vibration. For your convenience, these are sold individually. So, add as many as you need to your cart now.
The precision shim is a key part of the Dual V Wheel Kit – Delrin and Dual V Wheel Kit. By placing it between the two bearings, you can avoid binding and make your project run more smoothly. Plus, they're inexpensive and can be used on any project! 10mm OD x 5mm Bore x 1mm thickness.
This complete Solid Wheel Kit allows for easy assembly of V-Slot aluminum extrusions. The wheels are perfectly dimensioned to slide along the extrusions, providing low-friction, high-wear resistance, load distribution, and resistance to deflection. These wheels are the perfect choice for you to achieve smooth motion having light and medium loads in your system. They also are individually milled for consistent high precision and tolerance.
The Belt Mount Plate L Type is an easy way to attach the ends of an open-ended belt to a V-Slot or another t-slot extrusion. To tension the belt, attach one end then tension the belt as a second clip is attached. Using the perpendicular hole, an M5 screw and nut can be used as a tensioner. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
Looking for a sturdier, more reliable T-Nut for your next project? Our Sliding T-Nut is perfect for all V-Slot aluminum extrusions. The extra thickness allows for greater screw-to-thread contact and a tighter, firmer fastening.
The shim is an important part of the Mini V Wheel Kit. By placing it between the two bearings, you can avoid binding and keep your wheels working properly. Plus, they're affordable enough to use as a washer on any of your projects! 8mm OD x 5mm Bore x 1mm thickness.
The Smooth Idler Pulley Kit makes it easy to assemble an idler-free wheel that can be used with a timing belt up to 9mm wide. You can mount it in different ways depending on your design, including plate-mounted or direct tee slot-mounted using a tee nut and a spacer.
Looking for screws that are both durable and precise? Look no further than our M3 screws, made from black oxide-treated hardened steel. These screws have precision threads and deep, square-edged hexes, making them perfect for a variety of applications.
V-Slot is a high-quality extruded aluminum profile building block that has an extremely smooth linear v-groove rail on all 4 sides. It’s precise, easy to work with, and allows you unlimited design control through its modular nature. Additional freight costs will incur for shipping greater than 1500mm lengths. Please call or email us for longer and bulk quantities.
Our Thrust Bearings are made with two washers and a cage, using high-hardness chrome steel for the washers to bear a large load. These bearings are great for our Actuator Kits and C-Beam Kits.
V-Slot is a high-quality extruded aluminum profile building block that has an extremely smooth linear v-groove rail on all 4 sides. It’s precise, easy to work with, and allows you unlimited design control through its modular nature. Additional freight costs will incur for shipping greater than 1500mm lengths. Please call or email us for longer and bulk quantities.
Eccentric Spacers 6.35mm (1/4″) - If you're looking for a way to tighten up your V Wheels on V-Slot, eccentric spacers are the perfect solution. These little guys are essential when you want to avoid any slack in the movement of the gantry cart. So don't wait, pick up some eccentric spacers today!
These rubber end stops are perfect for use with linear rails. By placing them on the end of the rail, you can prevent the carriage from running too far. They work well with limit switches as an additional measure of protection.
The SBR Supported Rods are great for use with SBR Linear motion ball slides. With no need for extra support brackets, these rods can be used over longer lengths for a continuous, uninterrupted motion. Note that this listing is for the rod only – bearings are not included. You can find bearings for the SBR Linear motion ball slides here.
The DCcduino Uno is a micro-controller board compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. Simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Looking to fine-tune your V Wheels? Our Eccentric Spacers of 6/6.35mm height are perfect for adjusting your V Wheels onto V-Slot. With an approx 0.79mm adjustment range, you can be sure of a very strong and secure connection between the V rail and the wheel. 10mm flange allows for a sturdy base for a stable wheel mount.
This high-quality aluminum flexible jaw coupling is perfect for connecting your NEMA24 stepper motor (DC motor shaft 8mm) to your lead screw. The flexibility will help with any misalignment while the jaw allows for higher torque than our Flexible Couplings. So why wait? Get yours today!
The Belt Mount Plate L Type is an easy way to attach the ends of an open-ended belt to a V-Slot or another t-slot extrusion. To tension the belt, attach one end then tension the belt as a second clip is attached. Using the perpendicular hole, an M5 screw and nut can be used as a tensioner. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
Eccentric Spacers 6.35mm (1/4″) - If you're looking for a way to tighten up your V Wheels on V-Slot, eccentric spacers are the perfect solution. These little guys are essential when you want to avoid any slack in the movement of the gantry cart. So don't wait, pick up some eccentric spacers today!
The Idler Pulley Plate gives you a way to mount your Smooth Idler Pulley while still being able to move it around. This is helpful because it makes it easy to tension your belt.
Enclosures guard your workshop and machine against harm due to elements like dust, temperature, and UV light, and reduce noise from the machine. Enclosure dimensions 1.5x1x1 meter length, width and height respectively. If you need help with the design or have any questions, please let us know. We're always happy to help!
The C-Beam Actuator Kit is an actuator driven by an ACME lead screw. It includes everything you need for the build, and is available in 250mm, 500mm, 1000mm, and 1500mm sizes.
Looking for an easy way to attach your Cable Drag Chains to your build? Look no further than our Cable Drag Chain Mounting Brackets. With multiple holes and slots, they're designed to accommodate a wide variety and size of Cable Drag Chain ends.
Enclosures guard your workshop and machine against harm due to elements like dust, temperature, and UV light, and reduce noise from the machine.Enclosure dimensions 1x1x1 meter length, width and height respectively. If you need help with the design or have any questions, please let us know. We're always happy to help!
No matter the project, these Allen Key / Wrench Tools will come in handy. They're available in sizes from 2mm – 5mm and fit all of our screws. So why wait? Add them to your cart today.
The Belt Mount Plate is an easy way to attach an open-ended belt to a V-Slot or other t-slot extrusion. Just wrap the belt through the slots and over itself like you would a typical backpack strap. To tension the belt, attach one end first, then tension the belt as you attach the second clip. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.
Keep your work area tidy with our Cable Saddles. Attach them to V-Slot or Plates with the included M5 8mm Low Profile Screw and Drop-in Tee Nut. Check out the photos for some mounting ideas.
OpenRail is a versatile linear rail system that can be used with any V-Slot linear rail. It's perfect for use with our selection of OpenRail Gantry Plates and Delrin Dual V Wheels.